SEMI AUTOMATIC TRANSMISSION
1. When the engine is in neutral speed, press the shift pedal to engage first gear (First down) without
accelerating the engine.
2. Gradually accelerate to start the motorcycle moving.
3. To brake, use the front and rear brakes lightly at the same time. Do not brake too hard to avoid
losing control of the unit.
4. To return to driving speeds you must decelerate and then lower the shift pedal to a previous gear.
Be careful not to rev the engine outside of specifications as it may cause irreparable damage.
AUTOMATIC TRANSMISSION
1. To start moving the motorcycle you will only have to accelerate. No changes will be necessary. To brake,
2. use the front and rear brakes lightly and at the same time. Do not brake too hard to avoid losing control
of the unit.
SAFE DRIVING
If you are driving on wet terrain, try to avoid sudden braking because you may skid and lose control.
control. To stop the vehicle on wet ground, brake slowly and bring it to a stable stop. When you need to brake
while turning, release the accelerator and apply the front and rear brakes gently until you slow down.
Applying the brakes suddenly while turning will cause you to lose control or overturn the unit.
Be careful when driving on loose or wet surfaces, drive stably. Sudden acceleration, braking or sudden
turns can cause loss of control of the motorcycle. Be careful when passing near a parked vehicle as the
driver or passengers may open the door and block your view or the road, causing an accident.
17
To Next Page
Loading...
