64
Table 27. OUTPut command summary
Command Description
:OUTPut
:TTL[1]
:LSENse <name>
:LSENse?
:TTL2
:LSENse <name>
:LSENse?
:TTL3
:LSENse <name>
:LSENse?
:TTL4
:LSENse <name>
:LSENse?
Path to set polarity of digital out-
put line 1:
Select polarity; active (AHIGH)
or active (ALOW).
Query polarity of line 1.
Path to set polarity of digital out-
put line 2:
Select polarity; active (AHIGH)
or active (ALOW).
Query polarity of line 2.
Path to set polarity of digital out-
put line 3:
Select polarity; active (AHIGH)
or active (ALOW).
Query polarity of line 3.
Path to set polarity of digital out-
put line 4:
Select polarity; active (AHIGH)
or active (ALOW).
Query polarity of line 4.
Table 28. ROUTe command summary
Command Description
:ROUTe
:CLOSe <list>
:STATe?
:CLOSe? <list>
:OPEN <list>
:OPEN:ALL
:OPEN? <list>
:SCAN
[:INTernal] <list>
Path and command to close speci-
fied channel:
Query closed channel.
Query specified channels
(1 = closed, 0 = open).
Open specified channel or all
channels.
Open all channels.
Query specified channels
(1 = open, 0 = closed).
Command path to configure and
control scan operations:
Specify an internal scan list (2 to
10 channels).
To Next Page
Loading...
