Keithley 2001 - Page 87

84
:STATus
:OPERation
:NTRansition <NRf>
:NTRansition?
:CONDition?
:ARM
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:SEQuence
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:TRIGger
[:EVENt]?
:ENABle <NRf>
Program the negative transi-
tion register.
Read the negative transition
register.
Read the condition register.
Path to control arm event
registers:
Read the event register.
Program the enable regis-
ter.
Read the enable register.
Program the positive tran-
sition register.
Read the positive transi-
tion register.
Program the negative tran-
sition register.
Read the negative transi-
tion register.
Read the condition regis-
ter.
Path to control the
sequence event regis-
ters:
Read the event register.
Program the enable reg-
ister.
Read the enable regis-
ter.
Program the positive
transition register.
Read the positive transi-
tion register.
Program the negative
transition register.
Read the negative tran-
sition register.
Read the condition reg-
ister.
Path to control trigger event
registers:
Read the event register.
Program the enable regis-
ter.
Table 31. STATus command summary (cont.)
Commands Description