Keithley 2001 - Page 88

85
:STATus
:OPERation
:TRIGger
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:QUEStionable
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:PRESet
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
:CLEar
Read the enable register.
Program the positive tran-
sition register.
Read the positive transi-
tion register.
Program the negative tran-
sition register.
Read the negative transi-
tion register.
Read the condition regis-
ter.
Path to control questionable
event registers:
Read the event register.
Program the enable register.
Read the enable register.
Program the positive transi-
tion register.
Read the positive transition
register.
Program the negative transi-
tion register.
Read the negative transition
register.
Read the condition register.
Return status registers to
default states.
Path to access error queue:
Read the most recent error
message.
Specify error and status mes-
sages for queue.
Read the enabled messages.
Specify messages not to be
placed in queue.
Read the disabled messages.
Clears all messages from
Error Queue.
Table 31. STATus command summary (cont.)
Commands Description