86
Table 32. SYSTem command summary
Command Description
:SYSTem
:PRESet
:POSetup <name>
:POSetup?
:FRSWitch?
:VERSion?
:ERRor?
:AZERo
:TYPE <name>
:TYPE?
:STATe <b>
:STATe?
:AMEThod <name>
:AMEThod?
:LSYNc
:STATe <b>
:STATe?
:KEY <NRf>
:KEY?
:CLEar
:FETCh
:FORMat <name>
Return to :SYST:PRES defaults.
Select power-on setup: RST, PRE-
Set, SAV0-SAV9.
Query power-on setup.
Query INPUTS switch (0 = rear, 1
= front).
Query revision level of SCPI stan-
dard.
Query (read) Error Queue.
Path to set up auto-zero.
Select auto-zero mode: NOR-
Mal, SYNChronous.
Query auto-zero mode (0 or 1).
Enable (1 or ON) or disable (0 or
OFF) auto-zero.
Query auto-zero (0 or 1).
Select reading acquisition method:
BURSt, NORMal, ASTReam,
SSTReam.
Query acquisition method.
Path to control line synchroniza-
tion of measurements.
Enable (1 or ON) or disable (0 or
OFF) line sync.
Query line sync (0 or 1).
Simulate key-press (1 to 31).
Query the last “pressed” key.
Clears messages from the Error
Queue.
Path to set fetch format.
Select format for :FETCh? com-
mand; SCPI or FRESh.
To Next Page
Loading...
