• SCPI2700: An instrument-specifi c language that allows
you to run code developed for Keithley Instruments Series
2700 instruments.
• SCPI2701: An instrument-specifi c language that allows you
to run code developed for Keithley Model 2701 instruments.
You cannot combine the command sets.
What cards can be used?
MODULE DESCRIPTION
7700 20-channel Differential Multiplexer Module
7701 32-channel Differential Multiplexer Module
7702 40-channel Differential Multiplexer Module
7703 32-channel High Speed Differential
Multiplexer Module
7705 40-channel Single-pole Control Module
7706 20-channel Differential Multiplexer with Automatic
CJC, 16 Digital Outputs, 2 Analog Outputs, and
Counter/Totalizer
7707 32-channel Digital I/O Module with 10-channel
Differential Multiplexer
7708 40-channel Differential Multiplexer Module with
Automatic CJC
7709 6x8 Matrix Module
7710 20-channel Solid-state Differential Multiplexer
with Automatic CJC
7711 2 GHz 50 Ohm RF Module
7712 3.5 GHz 50 Ohm RF Module
As delivered from Keithley Instruments, the DAQ6510 is set
to work with the DAQ6510 SCPI command set.
To set the command set from the front panel:
1. Press the MENU key.
2. Under System, select Settings.
3. Select the command set.
4. You are prompted to reboot.
To Next Page
Loading...
