2: Using the front-panel interface Model 2450 Interactive SourceMeter® Instrument
2-8 2450-900-01 Rev. C / December 2013
Saving screen captures to USB flash drive
You can save the content of the front-panel display to graphic file. The instrument saves these
graphic files, also known as screen captures, in sequentially-numbered files to the USB flash drive.
To save the screen capture:
1. Insert a USB flash drive in the USB port located on front panel of the instrument.
2. Navigate to the screen you want to capture.
3. Press the HOME and ENTER keys. The instrument displays "Saving screen capture."
4. Release the keys.
To Next Page
Loading...
