Kemppi 3200 - Kempoweld Panel Details; Operation Controls and Connectors; Cooling Unit Components; Wire Feeder Panel Details

EN
1.3 KEMPOWELD PANELS
1.3.1 Operation control and connectors
S1, H1
H2
S2
S3
X1
05
X2
S1 Main switch (pilot lamp H1)
S2 Voltage selecting switch (coarse grading)
S3 Voltage selecting switch (ne grading)
H2 Pilot lamp for overheating (power source)
X1 Return current connector (coarser arc)
X2 Return current connector (softer arc)
05 Accessory drawer
MSD-1 V/A metering unit (accessory)
1.3.2 Parts of cooling unit Kempoweld 3200W
Sw1
F2
S4
Hw4
Hw3
MSD-1
Sw2
S4 Main switch of cooling unit
Sw1 Selecting switch for gun´s cooling mode
Sw2 Water cooling test switch
Hw4 Pilot lamp for overheating
Hw3 Pilot lamp for lacking water pressure
4
Kempoweld 3200, 3200W / © Kemppi Oy / 1117