Kemppi 3200 - Accessories; Cooling Unit Connections; Rear Panel; Inside Wire Feeder Unit

EN
1.4.2 Accessories
KMW sync
K3 Wire feed adjustment selection (panel or push-pull gun)
X1 Control connector for push-pull gun
1.4.3 Cooling unit connections
01 Return water connector for gun
02 Feed water connector for gun
04 Inlet of water hoses
1.4.4 Rear panel
X3
X2
03
04
03 Shielding gas connector
X2 Control cable connector (Kempoweld or interconnection cable)
X3 Welding current connection (Kempoweld or interconnection cable)
1.4.5 Inside wire feeder unit
K4 Wire inch switch (wire feed into gun)
R3 Burn back time adjustment (according to ller material and wire feed)
04 Locking device for wire reel
05 Box door latch
06 Box door lock
07 Wire feed mechanism
6
Kempoweld 3200, 3200W / © Kemppi Oy / 1117