ArcValidator
Operating manual - EN
>> Select the USB connection option
>> Follow the on-screen instructions to connect the printer USB cable and power cord.
Kroko 36C will be automatically powered on once both, the USB cable and the power cord, are connected properly.
Once the installation wizard is complete, close the wizard by clicking Finish.
Printer settings
Follow the instructions below to set up the correct paper for printing:
1. Go to the Windows printers and scanners device settings.
2. Select your Kroko printer and continue to the printer's printing preferences.
>> Manage > Printing preferences
© Kemppi
18
AVPCRC / 2224
To Next Page
Loading...
