6. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility. The owner of the equipment is obliged to
deliver a decommissioned unit to a regional collection centre, per the instructions of local
authorities or a Kemppi representative. By applying this European Directive you will improve
the environment and human health.
7. ORDERING NUMBERS
Item Size Part number
FastMig™ KM 300 6033000
FastMig™ KM 400 6034000
FastMig™ KM 500 6035000
Earthing cable 5 m, 50 mm² 6184511
Earthing cable 5 m, 70 mm² 6184711
Cooling device Fastcool 10 606810001
Transport unit PM500 6185291
Gun holder GH 30 6256030
8. TECHNICAL SPECIFICATIONS
FastMig™ KM 300 KM 400 KM 500
Connection voltage, 3~50/60 Hz 400 V, -15...+20% 400 V, -15...+20% 400 V, -15...+20%
Rated power
60 ED - - 25.9 kVA
80 % ED - 18.5 kVA -
100% ED 12.9 kVA 16.9 kVA 20.1 kVA
Connection cable HO7RN 4G6 (5 m) 4G6 (5 m) 4G6 (5 m)
Fuse (delayed) 25 A 35 A 35 A
Load capacity 40 ˚C
60 % ED - - 500 A
80 % ED - 400 A -
100% ED 300 A 380 A 430 A
Max. welding voltage 48 V 48 V 48 V
Open circuit voltage 65 V 65 V 65 V
Idle power 25 W 25 W 25 W
Eciency at max. current 87 % 87 % 87 %
Power factor at max. current 0,9 0,9 0,9
Storage temperature range -40 ... +60 ºC -40 ... +60 ºC -40 ... +60 ºC
Operating temperature range -20 ... 40 ºC -20 ... 40 ºC -20 ... 40 ºC
Degree of protection IP23S IP23S IP23S
EMC class A A A
EN
15
FastMig KM 300, 400, 500 / © Kemppi Oy /0901
FI
SV
NO
DA
EN
DE
NL
FR
ES
PL
RU
To Next Page
Loading...
Need help?
General
