Kemppi FastMig KM400 User Manual

External dimensions
Length 590 mm 590 mm 590 mm
Width 230 mm 230 mm 230 mm
Height 430 mm 430 mm 430 mm
Weight 34 kg 35 kg 36 kg
Voltage supply for auxiliary devices 24 VDC 24 VDC 24 VDC
Voltage supply for cooling unit 1~, 400 V / 250 VA 1~, 400 V / 250 VA 1~, 400 V / 250 VA
9. WARRANTY POLICY
Kemppi Oy provides a warranty for products manufactured and sold by the company if
defects in materials or workmanship occur. Warranty repairs are to be carried out only by
anauthorisedKemppiServiceAgent.Packing,shipping,andinsuranceareattheorderer’s
expense.
The warranty starts on the date of purchase. Spoken promises not included in the terms of
warranty are not binding on the warrantor.
Limitations of the warranty
Thefollowingconditionsarenotcoveredunderthetermsofwarranty:defectsarising
from normal wear and tear, non-compliance with operation and maintenance instructions,
overloading, negligence, connection to incorrect or faulty supply voltage (including voltage
surges outside equipment specications), incorrect gas pressure, anomalies or failures in the
electric network, transport or storage damage, and re or damage due to forces of nature. This
warranty does not cover direct or indirect travel costs, daily allowances, or accommodation
related to warranty service.
The warranty does not cover welding torches and their consumables, feeder drive rolls, and
feeder guide tubes.
Direct or indirect damage caused by a defective product is not covered under the warranty.
The warranty becomes void if modications are made to the machine that are not approved
by the manufacturer or if non-original spare parts are used in repairs.
The warranty is voided if repairs are carried out by a repair agent not authorised by Kemppi.
Undertaking warranty repairs
Warranty defects must be reported to Kemppi or an authorised Kemppi Service Agent without
delay.
Before a warranty repair is undertaken, the customer must present proof of warranty or
otherwise prove the validity of the warranty in writing. The proof must indicate the date of
purchase and the manufacturing number of the unit to be repaired. The parts replaced under
the terms of this warranty remain the property of Kemppi and must be returned to Kemppi if
requested.
After a warranty repair, the warranty of the machine or equipment, repaired or replaced, shall
be continued to the end of the original warranty period.
16
FastMig KM 300, 400, 500 / © Kemppi Oy / 0901
FI
SV
NO
DA
EN
DE
NL
FR
ES
PL
RU

Kemppi FastMig KM400 Specifications

General

Brand	Kemppi
Model	FastMig KM400
Category	Welding System
Language	English