© KEMPPI OY
MASTER MLS™ 1600, MASTERTIG MLS™ 2000 / 0530 – 17
Master MLS™ 1600, Mastertig MLS™ 2000
Mains voltage 1~ 50/60 Hz 230 V - 10 %...+ 10 %
Rated power 35% ED MMA 160A / 7,1 kVA
60% ED MMA 140A / 5,8 kVA
100% ED MMA 120A / 4,8 kVA
30% ED TIG 200A / 6,5 kVA
60% ED TIG 150A / 4,2 kVA
100% ED TIG 130A/ 3,4 kVA
Connection cable/fuse 3 x 2,5S - 3,3 m/16 A delayed *)
Welding current range
MMA 10 A/20,5 V...160 A/26,4 V
TIG 5A/10,0 V...200 A/18,0 V
Max welding voltage 36 V / 160 A
Electrode sizes to be
welded
Ø1,5...4,0 mm
Welding current control stepless
Open circuit voltage 80 V (tai 40 V)
Efficiency 80 % (160 A/26,4 V)
Power factor 0,75 (160 A/26,4 V)
Open circuit power approx. 10 W
Storage temperature
range
-40 … +60 °C
Operation temperature
range
-20 … +40 °C
Temperature class H (180 °C / B (130 °C)
Degree of protection IP 23 C
External dimensions
length 410 mm
width 180 mm
height 390 mm (body 330 mm)
Weight
TIG power source 15 kg
MMA power source 14 kg
5. TECHNICAL DATA
*) With 16 A fuse max. welding current is 150 A. If this exceeded a 20 A fuse and plug are
needed.
The products meet the conformity requirements of CE-marking.
To Next Page
Loading...
Need help?
General
