Kemppi Minarc 150 User Manual

EN
• Alwaysstorethemachineinadryandcleanspace.
• Protectthemachinefromsandanddustduringuseandinstorage.
• Therecommendedoperatingtemperaturerangeis-20to+40°C.The
machine’soperationeciencydecreasesanditbecomesmoreproneto
damageifusedintemperaturesinexcessof40°C.
• Placethemachinesothatitisnotexposedtohotsurfaces,sparksor
spatter.
• Makesuretheairowtoandfromthemachineisunrestricted.
• EMCclassicationofthisproductisclassAinaccordancewith
electromagneticcompatibilitystandardsCISPR11andIEC60974-10,and
therefore the product is designed to be used in industrial environment
only.
WARNING: This class A equipment is not intended for use in residential locations
where the electrical power is provided by a public low-voltage supply system. In
those locations it may be dicult to ensure the electromagnetic compatibility
due to conducted and radiated disturbances.
• Arcweldingequipmentalwayscauseelectromagneticdisturbance.
To minimize the harmful eects of this, use the equipment strictly
according to the operating manual and other recommendations.
Gas bottles and pneumatic devices
• Adheretotheinstructionsforhandlingpneumaticdevicesandgas
bottles.
• Makesurethatgasbottlesareusedandstoredinproperlyventilated
spaces.Aleakinggasbottlemayreplacetheoxygenintheinhaledair,
causing suocation.
• Beforeuse,makesurethatthegasbottlecontainsgassuitableforthe
intended purpose.
• Alwaysxthegascylindersecurelyinanuprightposition,againsta
cylinderwallrackorpurpose-madecylindercart.
• Nevermoveaprotectivegasbottlewhentheowadjusterisinplace.
Put the valve cover in place during transportation.
• Alwaysclosethegascylindervalveafteruse.
Disclaimer
While every eort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions. Kemppi reserves the right to change the specication of
the product described at any time without prior notice. Do not copy, record,
reproduce or transmit the contents of this guide without prior permission
from Kemppi.
6
Minarc 150, 151, 150 VRD, 120/150 AU / © Kemppi Oy / 0901

Kemppi Minarc 150 Specifications

General

Input Voltage	230 V
Protection Class	IP23S
Input Current	16 A
Welding Current Range	10 - 150 A
Weight	4.0 kg
Output Current	150 A
Electrode Size	1.5 - 3.25 mm
Power Supply	Single-phase
Welding Processes	MMA