3. MACHINE USE
3.1. Before commissioning machine
MinarcTig
TM
is packed in purpose made, recyclable packaging. However, always ensure
that the equipment has not been damaged in transportation. Please ensure that any
damage to the equipment is notied to your supplier immediately. (Retain all packaging
under these circumstances). Check that you have received all of the goods/items you
ordered.
Transportation
The machine should be transported in an upright position.
Environment
The machine is suitable for both indoor and outdoor use, but it should be protected from
heavy rain and sunshine. Store the machine in a dry and clean environment and protect
it from sand and dust during use and storage. The recommended operating temperature
range is -20 to +40 degrees Celsius.
Site the machine so it does not come into contact with hot surfaces and welding
spatter. Make sure the air ow to and from the machine is unrestricted.
To Next Page
Loading...
Need help?
General
