= Threading the upper looper
Place a spool of thread on the spool pin second from the
right
"_ Points to thread for upper looper are marked in red..
There is a convenient threading chart located inside
the looper cover.
A.. C) Thread guide
Draw the thread through the thread guide second from
the right from back to front.
B. 0 Thread guide plate
Pass the thread through the holes in the second row
from the right of thread guide plate as illustrated_
C. (_ Looper thread guide
Pass the thread through the left side of thread guide
sliding the thread from right to left.
®
®
L.J
® $
NOTE:
(_ Lower looper thread
(_ Upper looper
Turn the handwheel toward you until the upper looper comes
to the middle point of its travel, and unhook the thread of
the lower looper from the upper Ioope_
Thread the upper looper.
26
To Next Page