SEC_TION 4. CARE FOR YOUR MACHINE
:_' Disconnect the machine from the power supply before
cleaning,
_' You may use vacuum cleaner to clean the upper knife
area or feed dog.
Cleaning upper knife area
Open the looper cover
Remove the waste materials with a brush.
Cleaning the feed dog
Open the looper and side covers.
Remove the needles and presser foot.
Remove the needle plate set screw C) and needle plate.
(_) Needle plate set screw
Push the lint around the feed dog to the front by using a
brush.
Replace needle plate, presser foot and needles. Then close
the looper and side covers.
86
To Next Page
Loading...
