Pin tucking
Stitch length : R
Differential feed ratio : 1,0
Needle : 1 (Right needle) x HAq SP No, 11
Needle plate : Rolled hemming needle plate
(Marked "R" on reverse side.)
Thread
Needle :
Loopers :
Synthetic: No, 60 - 80,
Silk: No. 50 - 80
Synthetic: No, 60 - 100,
Silk: No. 50 - 100
Fabric : Light to Medium
©
©
Standard setting of tension dials
C) Needle thread tension (Right) : 4
(_ Upper looper thread tension : 6
(_) Lower looper thread tension : 4
:_' Refer to pages 50 - 54 and 72 (Narrow hemming) for
thread tension balance adjustment
®
®
@
8O
To Next Page