Kenmore 52 - Picking up Bobbin Thread; Adjusting the Pressure of the Presser Foot

/ /
!!!:;..........
PICKINGUP BOBBINTHREAD
Raise presser toot lever.
Hold needle thread loosely in le[t hand m_d rotate
band Wheel toward you one complete turn,
Bring bobbin thread up by pulling upper thread,
(See illustration).
Place threads back under presser foot.
ADJUSTINGTHEPRESSUREOFTHEPRESSERFOOT
Push down outer ring oi presser foot knob _See
illustrati, m'_. Th{s will reiease orcssure of presser
foo-t To increase m-cssure, push down inner pin
until snJtabIe pressure is obtained,
For ordinary sewing, the ironer pin should be abou_
hall way clown. When ._ewing multiple thickness or
heaw material- reduce the pressure. Increase iv
when se_.ma sheer fabric,$.
|nsn[ficic*_t pressure may causc skipped stitches or
difficulty m guiding the fabriL', If [eed dog or
presser foot marks aDt]ear oil [he Iahric. reduce the
pro sstlre,