Kenmore 52 - Needle and Thread Table; Needle Size; Placement of Needle

NEEDLEAND
NEEDLE
THREAD SIZF
SIZE
Cotton 60-t00
S', nfnefl¢
Si_k A
Machine emDro ae_-v
THREADTABLE
FABR C
Sheer COT1DD$ $1]k$. en¢_ $yP_tnetl_S
Fine laces
Cotton 60-80
Mercerize_ 50
S_r_the_m¢_ 14
Silk A
P_a chiee em D_-olaerv
Cotton 40-60
Mercerized 50 "6
Merce-mzea heavy duty
{Cotton 30-50
"8
N_ercerl_e_ heavy amy
Medium we_rlT eol'_ans
Mediurr weight sl_xs
MealUrr we grit s'_'_thetic. _
LighT W{_]_-- W¢olens
_aV_' WGl_r'if ¢OTTOP_S
Medium ra neavy weig-" wcolens
meow aramer- Fabrics
Heaviest CO_TODS a_ for men's ,,,zor_: c_o_nes
Iq_avles_ WOolen coa_ n_
NEEBLESIZE
Use KENMORE 6021 necdies. The size o[ the needle should
conform to the size o1[ the [hread and both should be suitable
to _he material. The same size thread should be used in the
bobbin as on the upper part o_ the machine for ordinary
sewing, Never use a bent needle nor one with a blunt point,
Ths _s me exact _ength of _ne needle _a De
used -/o_r machine. C01"r'_oar]_an with
thi_ Hlustration _ui de_ermine whether the
needle you _ave is Tn_ corre:T one for
your rnacBine.
5
PLACEMENTOFNEEBL[
Raise needle bar to its highest po-
sition by turning hand wheel
toward you. Loosen nccdlc clamp
screw. Hold the needle with flat
side away from you, Slip the
needle as far as it will go into the
needle clamp, and tighten the
thumb screw.
Flat
side
away
from
yOU.