Kenmore 52 - Winding the Bobbin

WiNDiNG THE BOBBIN
@
Place thread on the bedplate
spoul pin. I)raw thread to
the left behind the bobbin
thread guide, throtlgh the
slot, .isee illustration) then
from left to right under the
bobbi_ willder thread guide.
0
Release clutch by turning
clutch knob toward you.
Start machine. When
bobbin is [ul!, wii_dlng
mechanism stops automa-
tically.
@
Wind thtTead around bobbin
a tew times. Place bobbin
onto bobbin1 wil_der shaft;
PreSs b_bbin winder le_er
down.
@
Bobbin winder thread
guide is adjnstable. Ill
bobbin _t inds as illustrated, ::: {
slightly move thread guide
to an arrow direction to
correct tBis situation.
@
T_ghlcn Clutch km_b a_d
remove bobbin_
4_