CHANGtNGTHEPRESSERFOOT
The various attachment [ect available for certain kinds
of V_ork are to be fastened to the presses bar_
To attach the :foot, raise the presser bar to its highest
position by raising the presser foot lever. Loosen the
presser foot thumb screw, choose the proper foot,
insert from the front, Tighten the screw uMng the
large screw driver and make sure that the foot is
Secure_
TURNINGA CORNER
Stop sewing machine with needle in fabric. Rinse
presser foot. Turn fabric, Lower presser foot and
continue stitching.
FEEDDOG CONTROL
The drop feed control knob is situated on the right
front of machine bedplate. When knob is turned to
the right feed dog drops and does not pull material.
This allows the operator freedom of movemeng of
material, as [or darning. For regular sewing, turn
knob to the felt,
!!!_ill
To Next Page
Loading...
