EasyManua.ls Logo

Kenmore 52 - Applique; Sewing on Lace

Kenmore 52
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPLIQUE _ _ _
Baste cutout appllquc to fabric, Set stitch width 2 to
4. Set stitch length at the red mm-k opposite S.
Zigzag stitch arotmd applique coraplctely coverii_g
the raw edge.
SEWINGOHLACE u,o=_,_o_
Set stitch width to 1. Set stitch length to 1 or 2.
Place fabric under the presser foot and place lace on
top of fabric overlapping edge by )i inch. Start
sewing with needle at the left stitch, Position fabric
and lace so that needle goes into lett edge o[ lace,
To sew two pieces together to make a continuous
pattern, use the same method,
_2

Related product manuals