Kenmore Sears 16642 - Thread Tension Adjustment (3 Threads)

Thread Tension (3 threads)
Correct Tension
Upper looper
Ihread
J
Adjusting the thread tension may be
required depending on the type of fabric
and thread being used.
Thread Tension Adjustment
* Set all three thread tension dials at "'3"'. Then sew, and check the thread tensions,
Wrong Tension Wrong Tension Wrong Tension
and/or
Tighten needle thread tension,
Loosen lower looper thread tension
and!or tighten upper looper thread
tension,
Loosen upper looper thread tension
and/or tighten _ower looper thread
tension,
Needle lhread
|ensJon (L)
.leedte _hread
tension (R)
Upper looper Lower looper
lhread tension thread lens_oe
Upper looper Lower looper
lhread tension thread tension
34