Setting Up
38
User Interface Setup
You can setup user interface parameters.
1 Press the [MENU] button.
Popup menu appears.
2 Touch [SETUP].
SETUP screen appears.
3 Touch [User Interface].
User Interface screen appears.
4 Set each item as follows.
■ Beep
Turns the key touch tone on or off.
Default is “OFF”.
■ Language
Selects a language.
■ Steering Remote Controller
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
■ Clock Adjust
Adjust the date and time manually. (P.7)
Special Setup
You can setup Special parameters.
1 Press the [MENU] button.
Popup menu appears.
2 Touch [SETUP].
SETUP screen appears.
3 Touch [Special].
Special screen appears.
4 Set each item as follows.
■ DEMO
Set the demonstration mode. Default is “ON”.
■ Software Information
Check the software version of this unit.
(P.38)
■ Open Source Licenses
Displays the open source licenses.
■ Initialize
Touch [Initialize] and then touch [Ye s ] to set
all the settings to the initial default settings.
Ñ Software Information
Check the software version of this unit.
1 Touch [Software Information] in the
Special screen.
2 Confirm the software version.
!B5A-2247-10_DMX_E_EnFr.indb 38 2018/06/11 16:16
To Next Page
Loading...
