Kenwood DMX7018DABS - Initial Setup Procedures

Basic Operations
6
Initial Settings
Initial setup
Perform this setup when you use this unit first
time.
1
Set each item as follows.
■ Language
Select the language used for the control
screen and setting items. Default is “British
English(en)”.
1Touch [Language].
2Touch [Language Select].
3Select the desired language.
4Touch [
].
For detailed operation, see User Interface
Setup (P.38).
■ Clock
Adjusts clock.
For detailed operation, see Calendar/clock
settings (P.7).
■ Display
Set the image on the screen.
1Touch [Display.
2Touch [Background].
3Select the image.
4Touch [
].
For detailed operation, see Display Setup
(P.39).
■ Camera
Set the parameters for the camera.
1Touch [Camera].
2Set each item and touch [
].
For detailed operation, see Camera Setup
(P.35).
■ DEMO
Set the demonstration mode. Default is “ON”.
1Touch [DEMO] and set ON or OFF.
2
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.37).
!B5A-2247-10_DMX_E_EnFr.indb 6 2018/06/11 16:16