Kenwood eXcelon KDC-X993 - Satellite Radio Tuner Control (Advanced); Satellite Radio Channel Scan

42
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
• If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
“ACQUIRING SIGNAL”/ “NO SIGNAL” appears.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1 Start Channel Scan
Select “Channel Scan”.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Release it when the channel you want to listen
to is received
Press the Control knob.
Satellite Radio tuner (Optional Accessory) control
B64-4416-000009FLIPKen.indd42B64-4416-000009FLIPKen.indd42 09.1.73:54:09PM09.1.73:54:09PM