B
Benjamin WilliamsAug 31, 2025
What does 'TOC ERROR' mean on my Kenwood KDC-BT565U?
- DDaniel CarterAug 31, 2025
If your Kenwood Car Receiver displays 'TOC ERROR', make sure the disc is clean and inserted properly.
To Next PageTo Next PageWhat does 'TOC ERROR' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays 'TOC ERROR', make sure the disc is clean and inserted properly.
What does 'NO DISC' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays 'NO DISC', insert a playable disc into the loading slot.
What does 'NA FILE' mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NA FILE', make sure the disc contains supported audio files.
Why does 'LOADING' appear when entering search mode on my Kenwood Car Receiver?
If 'LOADING' appears on your Kenwood Car Receiver when you enter search mode, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
Why is elapsed playing time incorrect on my Kenwood KDC-BT565U Car Receiver?
If the elapsed playing time is not correct on your Kenwood Car Receiver, it is due to how the tracks were recorded.
Why do tracks not play back as intended on my Kenwood KDC-BT565U Car Receiver?
If tracks on your Kenwood Car Receiver do not play back as you intended, note that the playback order is determined when the files are recorded.
What does 'CHECK TUNER' mean on my Kenwood KDC-BT565U Car Receiver?
If your Kenwood Car Receiver displays the message 'CHECK TUNER', make sure the SiriusXM Vehicle Tuner is connected to the unit.
What does 'NO SIGNAL' mean on my Kenwood KDC-BT565U?
If your Kenwood Car Receiver displays the message 'NO SIGNAL', ensure that the antenna is mounted outside the vehicle.
What to do if my Kenwood KDC-BT565U says 'CHECK ANTENNA'?
If your Kenwood Car Receiver displays the message 'CHECK ANTENNA', check that the antenna and its connection are in good condition.
What to do if my Kenwood KDC-BT565U says 'READING keeps flashing'?
If your Kenwood Car Receiver displays 'READING' and it keeps flashing, avoid using too many hierarchical levels or folders.
General| Type | Car Receiver |
|---|---|
| DIN Size | Single DIN |
| Brand | Kenwood |
| Model | KDC-BT565U |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| WAV Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | Yes |
| Maximum Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Subwoofer Control | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| Pandora Control | Yes |
| Spotify Control | Yes |
| HD Radio | No |
| SiriusXM Ready | No |
| AM/FM Tuner | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Display Color | Variable Color |
Important safety warnings, cautions, and general advice before operating the unit.
Guides through setting the display language, clock, date, and initial system preferences.
Instructions for searching stations, direct access tuning, and radio settings.
How to play media from CDs, USB devices, iPod, and Android phones.
Guide to preparing, activating, and listening to SiriusXM satellite radio.
Steps for pairing Bluetooth devices for the first time and enabling auto-pairing.
Instructions for answering, rejecting, ending calls, and managing call quality.
How to stream audio from Bluetooth devices and control playback.
