What does 'TOC ERROR' mean on my Kenwood KDC-U4549SD Car Receiver?
The 'TOC ERROR' message on your Kenwood Car Receiver suggests an issue with the disc. This can occur if: * The CD is quite dirty. * The CD is upside-down. * The CD is scratched a lot. Try using another disc instead.
Why does my Kenwood KDC-U4549SD say 'READ ERROR'?
The 'READ ERROR' message on your Kenwood Car Receiver suggests an issue with reading the USB device. Try these solutions: * Copy the files and folders for the USB device again. * If the error persists, initialize the USB device or try using a different USB device.
What does 'NO MUSIC' or 'ERROR 15' mean on Kenwood KDC-U4549SD?
The message 'NO MUSIC' or 'ERROR 15' on your Kenwood Car Receiver indicates that the connected USB device or inserted SD card does not contain playable audio files. Ensure that the media played has data recorded in a format that the unit can play.
What does 'iPod ERROR' mean on my Kenwood Car Receiver and how to fix it?
If your Kenwood Car Receiver displays 'iPod ERROR', try the following steps: * Reconnect the iPod. * Ensure the iPod's software is updated to the latest version. * Reset the iPod.
What does 'NA DEVICE' mean on Kenwood Car Receiver?
The 'NA DEVICE' message on your Kenwood Car Receiver means that a supported USB device is not properly connected or a supported SD card is not inserted. Try the following: * Connect a supported USB device and check the connections. * Ensure the supported SD card is properly inserted.
Why does my Kenwood KDC-U4549SD say 'NO DISC'?
The message 'NO DISC' on your Kenwood Car Receiver indicates that there is no disc in the loading slot. Insert a playable disc into the loading slot.
What to do if my Kenwood KDC-U4549SD displays 'USB ERROR'?
If your Kenwood Car Receiver shows a 'USB ERROR', try these steps: * Remove the USB device, turn the unit off, and then turn it back on. * If the error persists, try connecting a different USB device.
What does 'NO DEVICE' mean on my Kenwood KDC-U4549SD Car Receiver?
The 'NO DEVICE' message on your Kenwood Car Receiver indicates that either no USB device is connected or the SD card is not properly inserted. To resolve this: * Connect a USB device and switch the source to USB. * Insert an SD card correctly and switch the source to SD.
How to fix Kenwood KDC-U4549SD when sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: * Adjust the volume to a suitable level. * Check the connections of the cords.
What to do if my Kenwood KDC-U4549SD radio reception is poor?
If you're experiencing poor radio reception or static noise with your Kenwood Car Receiver, try these steps: * Ensure the antenna is firmly connected. * Extend the antenna fully.
General| Brand | Kenwood |
|---|---|
| Model | KDC-U4549SD |
| Category | Car Receiver |
| Language | English |
Feature to automatically mute audio during incoming phone calls.
Instructions for playing music from discs, USB, SD, and iPod devices.
List of supported iPod and iPhone devices for connectivity.
Initial setup and connection procedures for hands-free calls.
Steps for pairing cell phones with the unit via Bluetooth.
Options for dialing numbers, using the phone book, and accessing call logs.
Methods for dialing numbers and utilizing voice commands for calls.
Procedures for answering, rejecting, disconnecting, and managing call waiting.
Automatically or manually transferring contact information from a cell phone.
Simple process for pairing new Bluetooth devices.
Procedures for first-time and subsequent cell phone registration.
Pairing devices using the unit's interface or the device's settings.
Transferring text messages from a cell phone to the unit.
Viewing received text messages on the unit's display.
Adjusting bass, treble, mid, subwoofer, and speaker output settings.
Important safety notes and precautions during unit installation.
To Next Page
