4
Press [J]/[K] to select a function item.
●
On full key models, you can enter a function number directly.
5
Press the [ ] or [ ] key to set up the selected function item.
●
Press the [ ] or [#] key to return to the category list.
6
Press [J]/[K] to select your desired setting.
●
For settings with more than one level, repeat steps 5 and 6.
7
Press the [
] or [ ] key to set the selected setting and exit Menu mode.
●
Press the [ ] or [#] key at any time to return to the previous display.
●
Press the [ ] key at any time to exit Menu mode.
KEY MODE
Your transceiver operations vary according to the functions that your dealer has
programmed onto the transceiver keys. Refer to “FUNCTION LIST” {p. 15} for the
available programmable functions.
FUNCTION LIST
PF Key: Functions that can be programmed to the transceiver keys
Menu: Functions that can be accessed using the transceiver Menu
Analog Conv.: Channels set up for Analog Conventional Operation
NXDN Conv.: Channels set up for NXDN Conventional Operation
P25 Conv.: Channels set up for P25 Conventional Operation
DMR Conv.: Channels set up for DMR Conventional Operation
LTR Trunking: Channels set up for LTR Trunking Operation
NXDN Trunking: Channels set up for NXDN Trunking Operation
P25 Trunking: Channels set up for P25 Trunking Operation
DMR Trunking: Channels set up for DMR Trunking Operation
p
: Available
N/A: Not Available
o
Conventional Operation
Function
Menu Display
PF Key
Menu
Analog
Conv.
NXDN
Conv.
P25
Conv.
DMR
Conv.
None -
p
N/A
p p p p
2-tone 2-tone
p p p p p
N/A
Activity Detection Activity Det
p p p p p p
Activity Reset -
p
N/A
p p p p
ANR Preset ANR Preset N/A
p p p p p
Audio Profile Audio Profile N/A
p p p p p
15
To Next Page
Loading...
Need help?
General
