Kenwood NX-5200K3 User Manual

Function Menu Display
PF Key
Menu
LTR
Trunking
NXDN
Trunking
P25
Trunking
DMR
Trunking
TX Audio Equalizer (Low) TX EQ Low N/A
p p p p p
TX Auto Gain Control TX AGC N/A
p p p p p
Vibrator Vibrator
p p p p p p
Voice Memo Voice Memo
p p p p p p
VOX VOX Level
p p p p p
N/A
VOX Function VOX
p p p p p
N/A
Zeroize Zeroize
p p p p p p
Zone Delete/ Add Zone Del/ Add
p p p
N/A N/A N/A
Zone Down -
p
N/A
p p p p
Zone Select
*6
-
p
N/A
p p p p
Zone Up -
p
N/A
p p p p
*1
Channel Select, Site Select and System Select can be programmed only on the Selector knob.
*2
Available only for 5-tone calls.
*3
Emergency can be programmed only on the Auxiliary (orange) key and the optional speaker/
microphone PF 1 (orange) key.
*4
Group, Group + Short Message, Group + Status, Individual, Individual + Short Message and
Individual + Status function as Selcall in FleetSync systems and 5-tone Signaling.
*5
Keyset and Rekey Request can be used when set as P25 OTAR.
*6
Zone Select can be programmed only on the Selector knob and the Lever switch.
24

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English