o
RX Auto Gain Control
Allows you to set the transceiver to automatically adjust the volume of the receiving
sound to a specific level for easy listening.
o
Save GPS Data <GPS_S>
Allows you to save the current date, time and location information on the microSD
card.
o
Save Log Data <Log>
Allows you to save the operation and communication logs of this transceiver.
o
Scan <Scan>
Refer to “SCAN” {p. 38} .
o
Scan Delete/ Add <D/A>
Allows you to include or omit each channel in the scan sequence.
o
Scan Normal <ScnNrm>
Allows you to forcibly perform a non-priority scan even when priority scan has been
set.
o
Scan Program <ScnPrg>
Allows you to reprogram the Scan List and Priority channels using your transceiver.
Refer to “SCAN PROGRAMMING” {p. 39} .
o
Scrambler/ Encryption <Scr/ Encryp>
Allows you to prevent a third party from listening in on your call. Refer to
“SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (P25/ NXDN/ DMR)” {p. 45} .
o
Scrambler/ Encryption Code
Allows you to change the scrambler code used in the transmission. Refer to
“SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (P25/ NXDN/ DMR)” {p. 45} .
o
Send the GPS Data <GPS_TX>
Allows you to send your positioning data to the base station when a GPS unit has
been installed.
o
Short Message <SDM>
Allows you to send short messages such as an address, telephone number, etc.
o
Site Down <Site->
Press this key to decrease the site number.
o
Site Lock <SiteLk>
Allows you to lock the current site. The transceiver will not be able to search for
alternate sites, and “Site Lock” appears on the display.
o
Site Number
This displays the site number.
34