o
Site Select
Allows you to select the site to lock.
o
Site Up <Site+>
Press this key to increase the site number.
o
Speaker Attenuation <SP Atn>
Press this key to attenuate received voice signals. This reduces the strength of the
speaker output to cut back any noise and distortion present in the signal.
o
Speaker Type
Allows you to select a speaker type that suits the optional external speaker
connected.
o
Squelch Level <SQL>
Allows you to adjust the transceiver squelch level.
When adjusting the squelch level, use the [J] and [K] keys to increase and decrease
the squelch level from 0 (open) to 9 (tight). The default setting is 5.
o
Squelch Off <SQ_Off>
Allows you to turn the transceiver squelch off, to better hear weak signals on the
channel.
o
Squelch Off Momentary <SQ_Off>
Press and hold this key to momentarily turn the transceiver squelch off. Releasing
this key turns the transceiver squelch back on. While squelch is off, you can better
hear weak signals on the channel.
o
Stack <Stack>
Allows you to check the records of received calls and messages received.
o
Status <Status>
Allows you to send status messages selected from the Status List.
o
Surveillance <Srvlnc>
Allows you to disable the alert, tone, backlight and LED functions.
o
System Down <Sys->
Press this key to select a previous system name and enable System Lock to the
system selected.
o
System Lock <Sys Lk>
Allows you to lock the current system via key operation so that it does not roam to
other systems in Multi-System Roaming.
35
To Next Page
Loading...
Need help?
General
