Kenwood NX-5200K3 User Manual

Playback
You can play back the voice recordings recorded using Auto Recording and Voice
Memo.
1
Press the key programmed as [Playback] to enter Playback mode.
Alternatively, press the key programmed as [Menu] to enter Playback mode using the
Menu Mode.
●
If a microSD card is not inserted in the transceiver, the voice recordings are listed on
the display. Proceed to step 4.
●
If a microSD card is inserted in the transceiver, the Saved (
), Auto Recording ( )
and Voice Memo ( ) folders where the voice recordings are stored are displayed.
Only the folder with files stored in it is displayed.
2
Press the [J] and [K] keys to select the Auto Recording or Voice Memo folder,
then press the [
] or [ ] key.
●
The subfolders in the folder are listed on the display.
3
Press the [J] and [K] keys to select a folder, then press the [ ] or [ ] key.
●
The voice recordings in the folder are listed on the display.
4
Press the [J] and [K] keys to move up and down the list.
5
Press the [
] or [ ] key to play back.
●
After playing back a recording, the transceiver will automatically play the next recording
until the last recording on the list is played.
●
To pause or resume playback, press the [ ] or [ ] key.
●
To skip to the next or previous recording, press the [H]/ [I] key. Press and hold the key
to fast-forward or rewind.
o
To play back the last recording directly
Press the key programmed as [Playback (Last Recording)] to play back the latest
audio data recorded using the Auto Recording function.
o
To save a recording
1
Press the [ ] key while the voice recording list is displayed. Then press the [ ]
or [ ] key.
●
A confirmation message appears on the display.
2
Press the [ ] or [ ] key to save.
●
The file is saved in the Saved folder.
o
To delete a recording
1
Press the [ ] key while the voice recording list is displayed. Then press the
[ ] or [#] key.
●
A confirmation message appears on the display.
2
Press the [ ] or [ ] key to delete.
o
To delete all recordings
1
Press the [ ] key while the voice recording list is displayed. Then press and hold
the [ ] or [#] key.
●
A confirmation message appears on the display.
2
Press the [ ] or [ ] key to delete.
79

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English