o
Making Group Calls (NXDN Conventional/ DMR Conventional)
You can select a group ID from the list to make a call to those parties on a
Conventional channel.
1
Press the key programmed as [Group], [Group + Short Message] or [Group
+ Status] to enter Group Call Mode.
Alternatively, press the key programmed as [Menu] to enter Group Call Mode using the
Menu Mode.
●
The group ID list appears on the display.
2
Press the [J] and [K] keys to select a Group ID/ name from the list that has been
pre-entered into your transceiver.
3
Press and hold the PTT switch to make the call.
●
The “ ” icon blinks. “Group” and the Group name of the target transceiver are
displayed.
●
Speak into the transceiver as you would during a normal call.
9
To Next Page
Loading...
Need help?
General
