Kenwood PW-A series User Manual

PW-A
3
SPECIFICATIONS
Specifications of PW18-1.8AQ
IT EMS A Channel B Ch annel C Channel D Channel
0 t o V
0 t o 1818 V
0 to
+
8 V
0 t o 6 V
10 mV 1 mV
± ( 0. 5% SET +2 0 mV ) ± ( 0. 5% SET +5 mV )
At 23
±
5 af ter 30 minute aging
0 t o +1 .8 A
0 t o 1. 8 A
0 to +2 A
0 t o 1 A
1 mA
± ( 1% SET
+
5 mA )
At 23
±
5 af ter 30 m inute aging
1 mV
( For ± 10% variation of s our c e voltage)
2 mV
(
(
For 0 to 100% variation )
0.5 mV
Measured in the RMS method using 5 Hz to 1 MHz signals .
Transient response 50
µs
( typ. )
Temperature coefficient 60
ppm/
at rated output voltage )
CC characteristics
2 mA
( For ± 10% variation of s ource volta ge)
5 mA
( For 0 to 100% variatio n )
1.5 mA
Ripp le noise
Measured in the RMS method using 5 Hz to 1 MHz
signals.
Temperature coef ficient
15 0 ppm/ ( at rated output current )
Voltage & current indication
Voltage indic ator
4 digit red LEDs, lowest digit:
10 mV
4 digit red LEDs, lowest digit:
1 mV
± ( 0. 5% rdg + 2 0 mV )/ 10 mV ± ( 0. 5% rdg + 5 mV )/ 1 mVVoltage indication
accuracy
accuracy
& resolution
At 23 ± 5 af ter 30 minute aging
Current indicator
4 digit red LEDs, lowest digit: 1 mA
±( 1% rdg + 5 mA )/ 1 mA
Current indication
& resolution
At 23 ± 5 af ter 30 m inute aging
Voltage & current
indication
range
2.5% FS to +102.5% FS /0% FS to
+
102.5% FS
Common Common
+-
-
-
-
-
ı
ı
ı
ı
ı
ı
-
-
-
-
-
-
Output voltage
Output current
Voltage setting resolution
Current setting resolution
Current setting accuracy
Voltage setting accuracy
CV characteristics
Ripple noise
Input variation
Input variation
Load variation
Load variation

Kenwood PW-A series Specifications

General

Brand	Kenwood
Model	PW-A series
Category	Power Supply
Language	English