Kenwood PW-A series User Manual

PW-A
4
SPECIFICATIONS
ITEMS A Channel Channe Channel
Output voltage
0 to +1 8 V 0 to 18 V 0 to +6 V
10 m V 1 mV
± ( 0. 5% SET +2 0 m V ) ± ( 0. 5% SET +5
mV )
At 23 ± 5 af ter 30 minute aging
Output current 0 to +1.3 A 0 to 1.3 A 0 t o +5 A
1 mA
± ( 1% SET + 5 mA )
At 23 ± 5 af ter 30 minute a ging
CV characteristics
1 mV
( For ± 10% variation of source voltage)
2 mV
( For 0 to 100% variat io n )
0.5 mV Ripple noise
Ripple noise
Measured in the RMS method using 5 Hz to 1 MHz signals .
Transient response
50 µs ( typ. )
Temperature coefficient
Temperature coefficient
60 ppm/ ( at rated output voltage )
CC characteristics
2 mA
( For ± 10% variation of s ource v oltage)
5 mA
( For 0 to 100% variation )
1.5 m A
Measured in the RMS method using
5 H z t o 1 MHz
sign als.
150 ppm/ ( at rated output current )
Voltage & current indication
Voltage indicator 4 digit red LEDs , lowest digit: 10 mV 4 digit red LEDs ,
lowest digit: 1 mV
± ( 0. 5% rdg + 20 mV )/ 10 mV ± ( 0. 5% rdg + 5
mV )/ 1 m V
Voltage indication
indication
accuracy
accuracy
& resolution
At 23 ±5 af ter 30 minute aging
Current indicator 4 digit red LEDs, low est digit: 1 mA
±( 1% rdg + 5 mA )/ 1 mA Current
& resolution
At 23 ±5 af ter 30
2.5% FS to +102 .5% FS /0% FS to +102 .5%
Common Independent
Approx . 200 W , 255 VA
Specifications of PW18-1.3AT(S) ATS is with a remote sensing terminal to C channel
BC
Voltage setting resolution
Current setting resolution
Current setting accuracy
Voltage setting accuracy
Input variation
Input variation
Load variation
Load variation
Voltage & current
indication
range
Common
Power consumption
-
-
-
-
ı
ı
ı
ı
ı
ı
-
-
-
-
minute aging
-
-

Kenwood PW-A series Specifications

General

Brand	Kenwood
Model	PW-A series
Category	Power Supply
Language	English