Specifications of PW36-1.5AD
0 to +36 V 0 to 36 V
mV
± ( 0.5% SET +20 mV )
At 23 ± 5 af ter 30 minute aging
0 to 0 to 1.5 A
1 mA
± ( 1% SET + 5 mA )
At 23 ± 5 af ter 30 minute aging
1 mV
( For ± 10% variation of s ource voltage)
2 mV
( For 0 to 100% variat io n )
0.5 m V
Measured in the RMS method using 5 Hz to 1 MH z signals .
50 µs ( typ. )
60 ppm/ (at rated output voltage )
2 mA
( For ± 10% variation of source voltage)
5 mA
( For 0 to 100% variation )
1.5 mA
Measured in the RMS method using 5 Hz to 1MHz
signals.
ppm/ ( at rate d output current )
4 di git r ed LEDs , lowest digit: 1 0 mV
± ( 0. 5% rdg + 20 mV )/ 10 mV
At 23 ±5 after 30 minute aging
4 digit red LEDs, lowest digit: 1 mA
±( 1% rdg + 5 m A )/ 1 mA
At 23 ±5 after 30 minute aging
2.5% FS to +102 .5% FS /0% FS to +102 .5%
Approx . 192 W , 250 VA
ITEMS
ChannelA
ChannelB
10
Output voltage
Output current
Voltage setting resolution
Current setting resolution
Current setting accuracy
Voltage setting accuracy
CV characteristics
Ripple noise
Input variation
Load variation
Ripple noise
Input variation
Load variation
Transient response
Temperature coefficient
CC characteristics
Temperature coefficient
Voltage & current indication
Voltage indicator
Voltage indication
accuracy
& resolution
Current indicator
indication
accuracy
Current
& resolution
Voltage & current
indicatio
range
Common
Power consumption
ı
ı
ı
ı
ı
ı
-
-
-
150
-
-
-
-
-
Common
-
1.5 A
+
To Next Page
Loading...
Need help?
General
