Specifications of PW18-3ADP
ITEMS
ChannelA ChannelB
Output voltage
Output current
0 to + 18 V 0 to + 18 V
Voltage setting resolution
Current setting resolution
Voltage setting accuracy
Current setting accuracy
10 mV
1mA
± (0.5% SET +20mV)
(1% SET +5mA)
At 23 ± 5 after 30 - minute aging
after 30 - minute aging
0 to +3A 0 to +3A
±
At 23 ± 5
CV characteristics
1 mV
(For ± 10% v a r iat ion of source voltage)
(For 0 to 100% variation)
(For 0 to 100% variation)
2 mV
0.5 mV
Measured in the RMS method using 5 Hz to 1 MHz signals.
Measured in the RMS method using 5 Hz to 1 MHz signals.
T rans ient re spo n s e 50 µs ( typ. )
T em perature c oeffic ie nt 60 ppm/ ( at rated output voltage)
( at rated output current)
CC characteristics
2 m A
5 m A Load variation
Input variation
Load variation
Input variation
1.5 mA
Ripple noise
Ripple noise
Temperature coefficient 150 ppm/
4 - digit red LEDs, lowest digit: 10mV
4 - digit red LEDs, lowest digit: 1mA
± ( 0. 5% rdg + 20 m V ) /10mV
At 23 ± 5 after 30 - minute aging
At 23 ± 5 after 30 - minute aging
Current indicator
Voltage indicator
Voltage & current indication
Current indication accuracy &
resolution
Voltage indication accuracy &
resolution
±(1% rdg + 5mA)/ 1mA
Voltage
range
current indication&
-2.5% FS to + 102.5% FS/0% FS to + 102.5% FS
Common Common
Power consumption Approx. 215W, 274 VA
(For ± 10% va r iat ion of source voltage)
ı
ı
ı
ı
ı
ı
To Next Page
Loading...
Need help?
General
