Specifications of PW16-5ADP
0 t o +6 V 0 t o +16 V
1 mV 10 mV
± ( 0. 5% SET +5 mV ) ± ( 0. 5% SET +2 0 m V )
At 23 ± 5 after 30 -
30 -
minute a ging
0 t o +3 A 0 t o +5 A
1 mA
± ( 1% SET + 5 m A )
At 23 ± 5 after minute aging
1 m V
( For ± 10% variat ion of source v oltage)
2 m V
( For 0 to 100% v ariat ion )
0.5 m V
50 µs ( typ. )
60 ppm / ( at rated o utput voltage )
2 mA
( For ± 10% variat ion of source v oltage)
5 m A
( For 0 to 100% variat io n )
1.5 mA
150 pp
m
/ ( at rate d ou tput current )
± ( 0. 5% r dg + 5 m V )/ 1 m V ± ( 0. 5% r dg + 20 m V )/ 10 mV
±( 1% rdg + 5 m A )/ 1 mA
Ap pr ox . 2 40 W , 300 VA
ITEMS
ChannelA ChannelB
Output voltage
Output current
Voltage setting resolution
Current setting resolution
Voltage setting accuracy
Current setting accuracy
CV characteristics
T rans ient re spo n s e
T em perature c oeffic ie nt
CC characteristics
Load variation
Input variation
Load variation
Input variation
Ripple noise
Ripple noise
Temperature coefficient
Current indicator
Voltage indicator
Voltage & current indication
Current indication accuracy &
resolution
Voltage indication accuracy &
resolution
Voltage
range
current indication&
Common
Common
Power consumption
Measured in the RMS method using 5 Hz to 1 MHz signals.
Measured in the RMS method using 5 Hz to 1 MHz signals.
4 - digit red LEDs, lowest digit: 10mV4 - digit red LEDs, lowest digit: 1mV
4 - digit red LEDs, lowest digit: 1mA
At 23 ± 5 after 30 - minute aging
At 23 ± 5 after 30 - minute aging
-2.5% FS to + 102.5% FS/0% FS to + 102.5% FS
ı
ı
ı
ı
ı
ı
To Next Page
Loading...
Need help?
General
