KERN 440 - Page 2

440-BA-defsi-0634
29
7 Operation_____________________________________________________ 41
7.1 Overview of display ______________________________________________ 41
7.2 Weighing _______________________________________________________ 41
7.3 Taring__________________________________________________________ 41
7.4 Plus / Minus Weighings ___________________________________________ 42
7.5 Piece counting __________________________________________________ 42
7.6 Gross-total Weighings ____________________________________________ 43
7.7 Percentage weighing _____________________________________________ 43
7.8 Weighing units __________________________________________________ 44
7.9 Rear illuminated display __________________________________________ 45
8 Settings ______________________________________________________ 46
8.1 Menu structure:__________________________________________________ 46
8.2 Dosage und Zero-tracking_________________________________________ 47
8.3 Select the adjusting weight ________________________________________ 47
8.4 RS 232 C Data output via interface RS 232 C__________________________ 48
8.4.1 Data transfer mode____________________________________________________ 48
8.4.2 Baudrate____________________________________________________________ 48
9 Interface RS 232 C _____________________________________________ 49
9.1 Technical Data __________________________________________________ 49
9.2 Description of the jack____________________________________________ 49
9.3 Description of the data transfer ____________________________________ 49
9.3.1 Pr PC______________________________________________________________ 49
9.3.2 AU Pr______________________________________________________________ 49
9.3.3 AU PC _____________________________________________________________ 50
9.3.4 rE Cr ______________________________________________________________ 50
10 Maintenance, upkeep, disposal _________________________________ 51
10.1 Cleaning _______________________________________________________ 51
10.2 Maintenance, upkeep _____________________________________________ 51
10.3 Disposal________________________________________________________ 51
11 Troubleshooting _____________________________________________ 52