KERN CPB-N - Page 19

 Press TARE button, the acceleration
value due to gravity is displayed.
 Press the TARE key anew
„LoAd 0“ appears, after a short time a signal
will sound and „LoAd 1“ appears
 First adjustment weight (s. tab. 1)
after a short time a signal will sound and
„LoAd 2“ appears
 Second adjustment weight
after a short time again a signal will sound
and „LoAd 3“ appears.
 Third adjustment weight
after a short time again a signal will sound
and „LoAd 4“ appears.
 Forth adjustment weight
after a short time again a signal will sound
and „LoAd 3“ appears.
 Forth adjustment weight
after a short time a signal will sound and
„LoAd 2“ appears.
 Third adjustment weight
after a short time a signal will sound and
„LoAd 1“ appears
(Example)

CPB-N / CPB-DM-BA-e-1424 20