KERN CPB-N - 11 Change Readability (Only Models CPB-M)

Determine lower limit value for target
weight:
 Enter the lower limit value via the
numeric keyboard, e.g.: 90 g
 Confirm within 5 sec:
Press repeatedly until the balance
is in weighing mode
Start tolerance check
 Place the load, wait until the acoustic signal sounds, depending on the settings
in the menu „F10“ (see chap. 11.2, only for non-verified models).
Delete limit values:
 For all limit values enter „0“ and confirm using the TARE button.
11 Change readability (only models CPB-M)
In order to change the readability, keep pressed. The last decimal point
flashes for approx. 3 sec. Within this period the value can be read-off in another
resolution.
This value is not verified!
CPB-N / CPB-DM-BA-e-1424 43