KERN CPB-N - Page 41

Select target weight mode:
By keeping pressed the desired
tolerance weighing mode can be
selected:
•
Check off – Tolerance check
switched off
•
Check psc - Tolerance check for
target item number
•
Check net -: Tolerance check for
target weight
Set limit values:
Determine upper limit value for target
weight:
 Press repeatedly and confirm
via the TARE button until „Hi nEt“
appears:
 Enter the upper limit value via the
numeric keyboard, e.g. 100 g
 Confirm within 5 sec:
 „Lo nEt“ appears:
CPB-N / CPB-DM-BA-e-1424 42