KERN EG 620-3NM - Page 48

EW/EG-N/EWB-e-1627
48
Not documented
9.
Ai
0
Not documented
☆
1
Always use this setting.
Data-out
(only selectable, if the cali-
bration switch is not in the
calibration position see
Ch. 5.10)
A.
PrF.
1
No printout possible, if the last display location
is enclosed in brackets.
☆
2
Printout possible, even if the last display loca-
tion is enclosed in brackets.
Comment: Always select this setting, before
the balance is calibrated, as this menu item
can no longer be called due to the calibration
3
The printout is only carried out, if the calibration
switch is not in the calibration position see
Ch. 5.10.
Enhanced log printout follow-
ing adjustment
(only selectable on
EG models)
0
GLP
0
Off
☆
1
On
**CALIBRATION**
MODEL:
S/N:
ID:
DATA:
TIME:
*CAL. END
NAME
********************
Title
Model of balance
Serial no.
ID no.
Date of calibration
Time of calibration
End of calibration
Signatur