KERN EG 620-3NM - Parameters for the Serial Interface

EW/EG-N/EWB-e-1627
50
7.2.2 Parameters for the serial interface
(excl. EWB models)
Function
Display
Choice
Description of the choice pos-
sibilities
Output format at inter-
face
7
I.F.
0
Interface not active
☆
1
6-digit data format
2
7-digit data format
Output condition at
interface
71.
o.c. 0 No data issued.
(Menu setting “7 I.F. [1] or
[2]“ only )
1 Continuous serial output.
2 Continuous serial output upon
stabilised display.
3 Output following printing of
PRINT/M.
4 Automatic output upon stable
weighing value. The first value to
stabilise is adopted if this is -0.00
or
less. No new output until weight
is removed and a new load ap-
plied.
5 Output upon stabilisation, no out-
put if data unstable.
6 Output upon stabilisation, con-
stant output if data unstable.
☆7 Output following printing of
PRINT/M.
Baud rate
72.
b.L.
☆
1
1200 bps
2
2400 bps
3
4800 bps
4
9600 bps
Parity
73.
PA.
☆
0
No parity bit
(Menu setting
1
Uneven parity
“7 I.F. 2“ only )
2
Even parity