EasyManuals Logo

KERN EMS User Manual

KERN EMS
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
EMS-BA-e-1213 9
Scope of delivery / serial accessories
Balance
Weighing plate
Mains power supply
Windshield, only EMS 300-3
Instruction Manual
5.3 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage. Only use original KERN mains adapters. Using other
makes requires consent by KERN.
5.4 Operation using a (rechargeable) battery (optional)
Lift-off the battery cover on the lower side of the balance. Connect 9 V compound
battery.
Replace the battery compartment cover.
For battery operation the balance has an automatic switch-off function which can be
activated or deactivated in the menu (see chapter 9.3).
In weighing mode keep the UNIT key pressed until „AF“ appears.
Use the SET key to confirm.
Use the MODE key to choose between the two following settings:
AF on“:
In order to save the battery, the balance switches automatically
off after 3 minutes without weighing.
AF off“:
Switch-off function deactivated.
Use the SET key to confirm selection. The balance returns to weighing mode.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KERN EMS and is the answer not in the manual?

KERN EMS Specifications

General IconGeneral
CalibrationExternal
DisplayLCD
MaterialStainless steel
Weighing unitsg, oz
Power supplyMains adapter
Plate size150 mm
Permissible ambient temperature10°C to 40°C

Related product manuals