KERN EMS - Auto-Zero Function; Reset to Factory Setting

EMS-BA-e-1213 23
Auto-Zero
function
0.0
g
AF
TR
TR
Qn
Use this function to enable or to disable the automatic zero
position
 In weighing mode keep the UNIT key pressed until [AF]
appears.
 Press the MODE key: „tr“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
0.0
g
 Use the SET key to confirm selection. The balance returns to
weighing mode.
Reset to factory
setting
0.0
g
AF
RST
RST
Qn
This function resets all menu items to factory setting
 In weighing mode keep the UNIT key pressed until [AF]
appears.
 Press the MODE key twice: „rSt“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
0.0
g
 Use the SET key to confirm selection. The balance returns to
weighing mode.