KERN EMS User Manual

18 EMS-BA-e-1213
Percent
determination
Percentage calculation facilitates weight display in percent
related to a reference weight equivalent to 100 %.
 In weighing mode press MODE key repeatedly,
until [100 %] is displayed flashing.
 Put a reference weight which corresponds to 100 %.
 Store by pressing the SET key. Remove reference weight.
 Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in
terms of the reference weight.
Back to weighing mode by pressing the MODE button.

KERN EMS Specifications

General

Calibration	External
Display	LCD
Material	Stainless steel
Weighing units	g, oz
Power supply	Mains adapter
Plate size	150 mm
Permissible ambient temperature	10°C to 40°C