KERN EMS User Manual

EMS-BA-e-1213 25
10 Instant help
In case of an error in the program process, briefly turn off the balance and
disconnect from power supply. The weighing process must then be restarted from
the beginning.
Help:
Fault Possible cause
The displayed weight does not glow.
• The balance is not switched on.
• The mains supply connection has been
interrupted (mains cable not plugged
in/faulty).
• Power supply interrupted.
• Batteries are inserted incorrectly or empty
• No batteries inserted.
The displayed weight is permanently
changing
-
• Draught/air movement
• Table/floor vibrations
• The weighing plate is in contact with
foreign matter.
• Electromagnetic fields / static charging
(choose different location/switch off
interfering device if possible)
The weighing value is obviously
wrong
• The display of the balance is not at zero
• Adjustment is no longer correct.
• Great fluctuations in temperature.
• Electromagnetic fields / static charging
(choose different location/switch off
interfering device if possible)
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.

KERN EMS Specifications

General

Calibration	External
Display	LCD
Material	Stainless steel
Weighing units	g, oz
Power supply	Mains adapter
Plate size	150 mm
Permissible ambient temperature	10°C to 40°C

Summary

Basic Safety Precautions

Pay Attention to Instructions in Operation Manual

Emphasizes reading the manual before setup and commissioning.

Personnel Training

States that the appliance must be operated and maintained by trained personnel.

Unpacking, Setup and Commissioning

Installation Site, Location of Use

Guides on selecting an optimal location for the balance to ensure accurate results.

Unpacking/Installation

Mains Connection

Explains connecting the balance to the mains power adapter.

Operation Using a (Rechargeable) Battery (Optional)

Initial Commissioning

Covers the initial setup steps after unpacking and connecting power.

Adjustment Procedures

Details the steps for initial, periodic, and specific balance adjustments.

Operating Elements

Operation

Basic Operations

Tare Management

Advanced Weighing Modes

Menu Navigation and Settings

Menu Navigation

Menu Overview and Functions

Service, Maintenance, and Disposal

Instant Help

Troubleshooting Common Faults

Lists common problems, their possible causes, and solutions.